Stage.OS Beta
Sign in

Stage.Kit

Coming soon, for every account.

A gear reference built into the app. It covers touring loudspeakers, with their weights, sizes, dispersion and rigging, and the consoles, amps and the rest of the system around them. Each maker’s touring range is included, down to the last variant.

The screenshots on this page are entries from the built-in gear reference in the app.

Overview

Picking a family, searching it, and opening a model’s page, from speakers to video, in about a minute.

From the nine families to a model’s page, in 64 seconds.

Nine families

Stage.Kit holds 1,357 models from 31 makers, in nine families listed down the side. It covers each maker’s touring and live range, both current models and the older ones still in rental stock, and every variant has its own page, so an SD7 and an SD7 Quantum are two separate entries. You pick a family, then a maker, then a model.

Consoles searched for SD7: DiGiCo’s SD7, SD7T and SD7 Quantum as three entries, with the SD7 Quantum open: 256 inputs, 128 buses, a 48 by 48 matrix, 52 faders, 112 kg, marked discontinued and now sold as the Quantum7
The consoles searched for “SD7”, with each variant as a separate entry.

Each family has its own search. Type part of a model’s name, or its maker, to narrow the family down.

Every model has a page. It gives the maker and where the model is from, then the figures in groups, with a note on what it’s for and how it differs from its siblings. Discontinued models are marked as discontinued.

The figures come from each maker’s own site, datasheets and manuals. Where a maker doesn’t give a figure, it’s left blank rather than guessed. Stage.Kit is meant for planning, so always check against the maker’s current datasheet, and a speaker’s rigging manual, before a job.

01Speakers

322 loudspeakers from L-Acoustics, d&b audiotechnik, Meyer Sound and Martin Audio, covering current ranges and older boxes still in rental stock. Each one has what you need to plan a hang.

L-Acoustics K1: 106 kg, 1342 by 438 by 520 mm, 90 degrees horizontal dispersion, 35 Hz to 20 kHz, 149 dB, its components, amplifier and PA-COM connectors, and its rigging bumper and frames
The L-Acoustics K1.

A speaker’s page gives its weight in kilograms and pounds, and its width, height and depth. For the sound there’s dispersion for most models, plus frequency response and maximum SPL.

It also lists what goes with the speaker: its drivers, the amp or controller that runs it, its connectors, and the frames and bumpers it flies from.

02Consoles

119 consoles from DiGiCo, Yamaha, Avid, Allen & Heath, Midas and SSL, with every size and version listed as its own model.

Yamaha RIVAGE PM10: 144 inputs on the DSP-R10 engine, 120 on the DSP-RX and 288 on the DSP-RX-EX, 72 mix buses, 36 matrices, 24 DCA and 12 mute groups, 96 kHz, 38 faders and two 15-inch screens, with the surface’s weight and size
The Yamaha RIVAGE PM10.

Each console’s page covers its channels, buses, matrices and DCAs, faders and screens, processing, sample rate and latency, I/O and networking, and the stageboxes it works with, plus its weight and size where the maker gives them.

03Console Engines

34 engines and MixRacks from Yamaha, Avid, Allen & Heath, Midas and DiGiCo, the units that run a console from the rack. Their pages cover processing, I/O and expansion.

The Avid E6LX-256 in Stage.Kit: 256 inputs, 192 buses plus LCR, a 64 by 64 matrix, 96 kHz, 8 option slots, AVB redundancy, the S6L surfaces it runs, 28.6 kg and 5U
The Avid E6LX-256.

04Amplifiers

87 amplifiers from Lab.gruppen, Powersoft, L-Acoustics, d&b and Crown.

d&b 10D: 4 channels of 700 W into 4 ohms or 350 W into 8, DSP presets, network audio and control, 10.6 kg and 2U
The d&b 10D.

Each amplifier’s page gives its channels, the power into each load, processing, networking and rack size.

05Processing / DSP

85 system processors and audio-network converters from Lake, Meyer Sound, BSS, L-Acoustics, QSC, Biamp and DirectOut. Their pages cover processing, I/O and formats, control and networking.

The Lake LM 44 in Stage.Kit: its I/O and formats, processing, control and networking, and physical size
The Lake LM 44.

06Stage Racks & I/O

61 stage racks and stageboxes from DiGiCo, Yamaha, Avid, Allen & Heath and Midas, both current and discontinued. Their pages cover channels and format, and how they connect.

The Yamaha Rio3224-D3 in Stage.Kit: a Dante remote I/O rack with its channels and format, connectivity and physical size
The Yamaha Rio3224-D3.

07Mics & RF

243 radio mic and in-ear units, antennas and distribution from Shure, Sennheiser, Sony, Wisycom and Lectrosonics. Their pages cover RF and audio, frequency and tuning, and power.

The Shure Axient Digital AD4Q in Stage.Kit: frequency and tuning, RF and audio, and physical size
The Shure Axient Digital AD4Q.

08Networking

74 switches from Luminex, Netgear and Cisco. Their pages cover ports, protocols and AV features, and management.

The Luminex GigaCore 30i in Stage.Kit: 24 RJ45 and 6 SFP+ ports, optional PoE++, Dante, AES67, AVB-Milan, ST 2110 and Q-LAN, IGMP snooping, QoS and VLANs, 1U
The Luminex GigaCore 30i.

09Video

332 products from Blackmagic Design, AJA, Barco, Analog Way and Panasonic, including video routers and their control panels. Their pages cover video formats and features.

The AJA FS-HDR in Stage.Kit: its video formats, features and physical size
The AJA FS-HDR.